Xhorse Dolphin XP005 Renault 4 button card emergency blade

 I have tried to cut one of these Renault 4 button card emergency blade today and the Xhorse Dolphin cut it ok.
the problem is the depth of the cut is wrong, is there a fix for this ?

 

 

Xhorse chief engineer solution:

Please copy by using Xhorse Universal Smart Key Knife Style XSKF01EN.

 

Read article:

Xhorse Dolphin XP005 feedback  (Someone tested decode & cut ok for the 2009-Renault emergency blade.)

 

And here is one locksmith’s solution:

Manual machine – No problem

Automatic – need to make a small spacer about 0,7mm-0,8mm – from sheet metal – About the same thickness of a lot vehicles.

So you can make it from an old door of a car, from the junkyard.
Same problem with Toyota one side cut. Same solution with this.
I have not used the Dolphin with this spacer, but other automatic machine works fine.
I guess I can test the Xhorse Dolphin XP005 also, one day.

 

Good luck!

 

And any question, please feedback in the Xhorse app or contact at www.xhorsevvdi.com.