Xhorsevvdi : 三月 2021

2021年3月31日星期三

How to move data from VVDI Mini Prog to keytool max / WhatsApp?

Xhorse VVDI MINI Prog is able to read & write EEPROM/ECU data (i,e 24Cxx, 93cxx, 95xxx, 25xxx etc, about 95% eeprom types in market), meanwhile it allows the user to upload the data to one computer, to share with other Xhorse devices i.e Key Tool Max after login with the same Xhorse account , or to send the data to WhatsApp / Wechat QQ etc.

Video reference:

VVDI MINI Prog read EEPROM AT24C04 (pressure) for example.

Look at the AT24C04 chip set.

Read the data using VVDI MINI Prog.

Select "EEPROM and FLASH" -> select manufacture ATMEL -> Select series (AT24CXX) -> Select model AT24C04 (pressure).

It will display its information, adapter outlook and connection diagram. Tap "Read" and then "EEPROM".

Next, 1. use the tool to clear the chip pin, 2. Connect the device and the adapter.

Then tap "Start Operation", there are 2 tips to follow:

1.Put the adapter on the chip (Press the light button to turn on the floodlight)

Please click & continue below or press START on MINI Prog to start operation.

EEPROM AT24C04 (pressure) reading successfully. click on "OK" to save the data. Meanwhile the green indicator on Mini Prog will lit up. It will tell you where the data is located.

Transfer the eeprom data from VVDI Mini Pro to one computer.

Back to the home menu of Mini Pro, select "File Management" , there are two options : Local file and My data.

Select " Local file" -> Mini -Prog -> AT24C04 (pressure). Tap the "..." and there will be options Move, share, upload etc, just tap "Upload" and then "Upload here" to my data, it will show "Upload successfully" and you can also back to "My data" to check if it contains the data file.

Next, follow the 4 steps to transfer the data to the computer:

Open the computer browser and input the website address http://i.xhorse.com/
Click [Scan and login computer terminal] or use Xhorse APP to scan QR code to login in computer website.
Upload the immo data tool to my data in computer.
Open my data can load file in device.

Share the eeprom data from VVDI Mini Pro to WhatsApp Wechat QQ

Back to " Local file" -> Mini -Prog -> AT24C04 (pressure). Tap the "...", select "Share" and then Send to WhatsApp, so that the Xhorse engineer will be able to assist you.

Share the eeprom data to other Xhorse devices i.e Key Tool Max

Before transferring the data from Mini Pro, please combine your xhorse devices and login Xhorse account.

With Key Tool Max, enter "File Management" then "My Data" and you will see T24C04 (pressure) eeprom data, that is shared with Mini Prog (Login the same account).

Good to know:

So far, VVDI Mini Prog, VVDI Key Tool Max, Key Tool Plus support transferring /sharing data to other devices.

Coryright http://blog.xhorsevvdi.com/

2021年3月28日星期日

How to use FEM BDC test platform add a spare key with VVDI Key Tool Plus Pad

Godiag FEM / BDC test platform can program new key, can add new key and replace FEM / BDC ECU module by working together with Godiag GT100 & Xhorse vvdi2 / VVD bim tool/ Key Tool Plus.

Here is the guide on how to FEM BDC test platform use add a spare key on bench with VVDI Key Tool Plus Pad

FEM BDC test platform add a spare key with

Main steps:

1.Verify original key
2.Check the new key
3.Add key with vvdi key tool plus
(This BDC has been preprocessed in advance)
4.First get the key information
5.Ready to generate dealer key

Select the location of the key
put in the original key to read the ISN
Put in the new key
Generate dealer key …

6.Check if the original key and new key works properly
All OK works done!

Video operation:

http://blog.xhorsevvdi.com/godiag-fem-bdc-test-platform-work-with-xhorse-key-tool-plus/

2021年3月24日星期三

Xhorse Dolphin XP005 Renault 4 button card emergency blade

I have tried to cut one of these Renault 4 button card emergency blade today and the Xhorse Dolphin cut it ok.
the problem is the depth of the cut is wrong, is there a fix for this ?

Xhorse chief engineer solution:

Please copy by using Xhorse Universal Smart Key Knife Style XSKF01EN.

Read article:

Xhorse Dolphin XP005 feedback (Someone tested decode & cut ok for the 2009-Renault emergency blade.)

And here is one locksmith’s solution:

Manual machine – No problem

Automatic – need to make a small spacer about 0,7mm-0,8mm – from sheet metal – About the same thickness of a lot vehicles.

So you can make it from an old door of a car, from the junkyard.
Same problem with Toyota one side cut. Same solution with this.
I have not used the Dolphin with this spacer, but other automatic machine works fine.
I guess I can test the Xhorse Dolphin XP005 also, one day.

Good luck!

And any question, please feedback in the Xhorse app or contact at www.xhorsevvdi.com.

How to Program W906 Sprinter 2016 With Xhorse VVDI Key Tool Plus

How-to: Xhorse VVDI Key Tool Plus Program W906 Sprinter 2016 Step-by-step:

Read key password online.

Key Tool plus read key password OK.

Prepare key file

After prepare file OK, write new key.

Test new key OK.

http://blog.xhorsevvdi.com/xhorse-vvdi-key-tool-plus-program-w906-sprinter-2016-ok/

2021年3月17日星期三

Xhorse VVDI Prog Read MC9S12DT256 secured connection diagram

Question: Have Mercedes Benz Vito EZS, I need to read MC9S12DT256 secured with VVDI Prog but it is not possible because it is MB? You need VVDI MB?ID ok but not possible to crack chip.