How to distinguish whether Audi BCM is an encryption Type

 

Recently released Xhorse BCM2 Solder-free Adapter allows users to read encrypted Audi BCM2 module, but how to know if it’s a locked version? In this article we’ll raise two ways:

1. Judge by the number on BCM2 module
2. Read BCM2 info by VVDI2/Key Tool Plus

 

Generally, BCM2 modules before 2013 are unencrypted while those after 2013 are encrypted.

However, there are exceptions after 2013 and it’s hard to judge 2013 versions.

Then we have

Method 1. Judge by the number on the BCM2 module

After we remove a BCM2 module, check the number on the box. (Here we have “0711”)

On the chip selection page of VVDI PROG or VVDI Key Tool Plus, supported numbers are listed on the below.

If our BCM2 number is on the list, we need to read it by an encrypted BCM2 Adapter.

Notes:

1)VVDI PROG has “LOCK_BCM2-1(ADAPTER)” and “LOCK_BCM2-2(ADAPTER)”

2)For our “0711”, we should select “(all versions)” on Key Tool Plus.

If we cannot find a number on our BCM2 modules, remove the cover to check the number on the chip of the circuit board.

Then see if our number is listed on unencrypted versions.

If so, read it by the selection prompt (our “3634” is unencrypted and it can be read in a soldering/solder-free way);

If not, Do Not Try to read a unknown-version BCM2 and contact your dealer to confirm.

 

Method 2. Read BCM2 info by VVDI2/Key Tool Plus

Sometimes we find part of BCM2 modules on the encrypted list are unencrypted, so we have the second way - OBD identify/read.

Before We Remove A BCM2 From A Vehicle, connect VVDI2/Key Tool Plus to your vehicle via OBD to check.

Path 1 (on VVDI2):

• Key Learn>>Fifth Immobilizer-Locked BCM2 version

Path 2 (on Key Tool Plus):

• Immo Programming>>Audi>>Select by type>>Fifth Immobilizer System>>Start Programming>>Read BCM2 Data>>OBD identify BCM2 type

It’s accurate to read BCM info via OBD, and then follow the instruction:

For unencrypted versions, read D-FLASH and P-FLASH without encrypted BCM2 adapters.

For encrypted versions, Do use encrypted BCM2 adapters.

 

Other tips

1. When we read an encrypted BCM2 with VVDI AUDI BCM2 adapters, Do Not click on “Unlock”, or the module will be erased and no way to restore.

2. During removing BCM modules or soldering cables to BCM circuit boards (Particularly in winter), Do care static electricity, which may cause damages to chips or data loss.

 

Alright, that’s how we identify BCM2 status and some tips during operation.

 

Thanks to xhorsevvdi for making this article: http://blog.xhorsevvdi.com/how-to-identify-an-encrypted-audi-bcm-by-xhorse-programmers/

How to program Xhorse Watch to Chrysler 300 2021 with VVDI KEY TOOL PLUS

 

This is a guide on how to use Xhorse Keylessgo Watch configuration & programming to your vehicle step-by-step.

 

SW-007 Keyless go Watch is another Xhorse Universal Smart remote. It can be programmed by your Key Tool Plus, Key Tool Max or even Mini Key Tool.

 

The process is similar to another Xhorse universal key:

1)Pick the FCC ID, remote, or your make and model

2)Write the configuration into the watch

3)Program it to the vehicle by any key programmers you want

 

Here is a complete demonstration for reference:

 

• Model: Chrysler 300 2021
• Tools:
• VVDI Key Tool Plus
• FCA 12+8 SGW Bypass Cable

Part 1. Generate the remote

Go to

• Remote Program>>North America>>Chrysler>>[All Remotes]>>Chrysler 200 KeylessGo ID4A

Put your smartwatch into the key coil and press “Generate”.

Here if you experience the error “Write Failed”, put your watch slightly deeper so that it could be detected.

Try again and you should put a slight bit of downward pressure on the watch and it would be done.

Part 2. Program the immobilizer

Plug Key Tool Plus to the vehicle via OBDII, and don’t forget the FCA 12+8 Converter since there is a security gateway in this model.

Go to

• Immo Programming>>North America>>Chrysler>>Select by model>>ASIA>>200>>2019-2021>>Smart key system>>Start Programming

  

Check “Key Count” and “Read PIN code”.

Then press “Add smart keys”

   

If it prompts “Fail”, try if the watch could work first.

Start the vehicle, no problem.

Done!

That’s how to use Xhorse SW-007 Smart Watch.

 

Thanks to xhorsevvdi for making this tutorial :http://blog.xhorsevvdi.com/how-to-use-xhorse-keylessgo-watch-smart-remote/

Xhorse Dolphin XP005 ,XP005L and PANDA XA-006 Comparison

Here we’ll talk about the differences among those locksmith key cutting machines Dolphin XP-005L, Dolphin XP-005, and Panda XA-006.

See the differences:

	Dolphin XP-005	Dolphin XP-005L	Panda XA-006
Image
Clamp	M1,M2(included in package) M3,M4(optional purchase)	M5(included in package) M3,M4(optional purchase)	A1(included in the package)
Cutter	1.5mm, 2.5mm	1.5mm, 2.5mm	1.5mm, 2.0mm
Indicator lights	Yes, good	Yes, excellent	Yes, good
Built-in battery	Yes	Yes	No,need 12V power supply
Screen	No	Yes	No
Protective Cover	Yes,Small	Yes, Complete	No
Net weight	15kg	13kg	12kg
Gross weight	18kg	18.5kg	15kg
Size	315*218*270mm	390*220*270mm	316*184*234mm
Control	via phone app	via phone app/screen	via phone app
Wi-Fi	No	Yes	No
Bluetooth	Yes	Yes	Yes
Firmware update	Connected to PC	On screen/phone app	Connected to PC
Database update	On phone app	On screen/phone app	On phone app
Offline operation	No	No	No
All Key Lost	Yes	Yes	Yes
Daily AKL limit	No	No	Free for the 1st time, 100 points each time
Warranty	1 year	1 year	1 year

In sum:

1. Clamp M5 and A1 allows that XP-005L and XA-006 don’t have to repeat installation of a clamp.

 

2. On hardware, XP005L wins a lot. Since

• With the quick-start screen we don’t have to operate it on our phone.
• A complete protective cover prevent fluttering metal fillings. (Some XP005users wanted to pay for the protective cover)
• Smart three-color indicators let us know the working status. (gray – Fault, Blue – Normal, Yellow – Prompt)

 

3. Online firmware update via Wi-Fi is definitely a big charm of XP-005L.

As XP005L supports Wi-Fi, we don’t have to plug it to a PC and update it via “Upgrade Kit”.

 

4. Panda XA-006 is the easiest to carry but it needs a power adapter since it hasn’t a built-in battery.

 

5.None support offline key cutting.

If you want an offline operation, you can check Condor XC-MINI Plus and  Condor XC-MINI Plus II 

 

Xhorse Dolphin XP005L Package List:

 

1pc x Machine

1pc x Clamp M5 and link stopper

1pc x 1.5mm cutter

1pc x 2.5mm cutter

1pc x Probe

1pc x 2mm+4mm 3mm hexagon bar wrench

1pc x 3mm hexagon bar wrench

1pc x 6mm hexagon bar wrench

1pc x Power adapter

1pc x 1.5m Power cord

1pc x Brush

1pc x Product quality certificate

1pc x User manual

 

Source:http://blog.xhorsevvdi.com/new-xhorse-dolphin-xp-005l-vs-dolphin-xp-005-vs-panda-xa-006/

Tips to engrave on a key blank with Xhorse CONDOR XC MINI PLUS II

Too many keys, hard to classify, would like a Key with unique design?
Luckily, Xhorse CONDOR XC-MINI PLUS II featuring thte Key Blank Engraving function,allows users to add and delete texts and pictures, resize and turn them to perfectly design a unique Key.

 Today,Xhorsevvdi took an Xhorse's " X"  image as an example

Tips: The image format must be PNG

Procedure:
Step 1: Insert the engraving cutter and the key blank



Tips :Engraving cutter and the key blank installation:

• Install the key blank on the M5 Clamp as shown in the figure above(The vertex cannot be occluded by the key blank please use a special engraving cutter)

Step 2: Send the picture you want to engrave to the machine
1.Pair the machine with your smartphone via Bluetooth.

2.Send the picture 



Step 3. Choose the picture and start to engrave

• Press "HOME" icon >> Click "mini plus II" icon>> Key blank engraving>>add picture>>Choose the picture and press OK>>Adjust the image to appropriate position then press Start engraving

Now Xhorse Condor XC-MINI PlusII Key Cutter starts to carve automatically,The first dot engraved will start from the highest point on the left the image 


Engraving completed!!!!

 

 

Thanks to Xhorsevvdi for making this article:http://blog.xhorsevvdi.com/how-to-customize-keys-with-condor-xc-mini-plusii/